Part Number Hot Search : 
SK5100SB TMBH400A ADMC326 2N6453 101M35 M57788 JANTXV1 LT1020
Product Description
Full Text Search
 

To Download 2N2907AHR Datasheet File

  If you can't view the Datasheet, Please click here to try to view without PDF Reader .  
 
 


  Datasheet File OCR Text:
  this is information on a product in full production. may 2012 doc id 15382 rev 3 1/16 16 2N2907AHR hi-rel 60 v - 0.6 a pnp transistor datasheet ? production data features linear gain characteristics hermetic packages escc and jans qualified european preferred part list eppl description the 2N2907AHR is a silicon planar pnp transistor specifically designed and housed in hermetic packages for aerospace and hi-rel applications. it is available in the jan qualification system (mil-prf19500 compliance) and in the escc qualification system (escc 5000 compliance). in case of discrepancies between this datasheet and the relevant agency specification, the latter takes precedence. figure 1. internal schematic diagram parameter value bv ceo 60 v i c (max) 0.6 a h fe at 10 v - 150 ma > 100 to-18 lcc-3 3 1 2 3 1 2 lcc-3ub 3 1 2 4 pin 4 in lcc-3ub is connected to the metallic lid. table 1. device summary (1) order codes qualification agency spec. package rad iation level eppl jans2n2907a jans mil-prf-19500/291 lcc-3ub - - 2n2907aub escc 5201/001 lcc-3ub yes soc2907a lcc-3 yes 2N2907AHR to-18 - 1. contact st sales office for information about the specific c onditions for products in die form and other jan quality levels. www.st.com
contents 2N2907AHR 2/16 doc id 15382 rev 3 contents 1 electrical ratings . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 2 electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.1 jans electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 4 2.2 escc electrical characteristics . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 5 2.3 electrical characteristics (curves) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 6 2.4 test circuits . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 7 3 package mechanical data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 4 order codes . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5 shipping details . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.1 data code . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 14 5.2 documentation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 15 6 revision history . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 16
2N2907AHR electrical ratings doc id 15382 rev 3 3/16 1 electrical ratings table 2. absolute maximum ratings symbol parameter value unit v cbo collector-base voltage (i e = 0) -60 v v ceo collector-emitter voltage (i b = 0) -60 v v ebo emitter-base voltage (i c = 0) -5 v i c collector current for to-18 for lcc-3 and lcc-3ub -0.6 -0.5 a a p tot total dissipation at t amb 25 c escc: to-18 lcc-3 and lcc-3ub lcc-3 and lcc-3ub (1) jans: lcc-3ub total dissipation at t case 25 c escc: to-18 1. when mounted on a 15 x 15 x 0.6 mm ceramic substrate. 0.4 0.4 0.73 0.5 1.8 w total dissipation at t sp(is) = 25 c jans: lcc-3ub 1 t stg storage temperature -65 to 200 c t j max. operating junction temperature 200 c table 3. thermal data symbol parameter lcc-3 lcc-3ub to-18 unit r thjc thermal resistance junction-case (max) for jans - - c/w thermal resistance junction-case (max) for escc -97 rt hjsp(is) thermal resistance junction-solder pad (infinite sink) (max) for jans 90 - thermal resistance junction-solder pad (infinite sink) (max) for escc -- r thja thermal resistance junction-ambient (max) for jans 325 - thermal resistance junction-ambient (max) for escc 437 240 (1) 1. when mounted on a 15 x 15 x 0.6 mm ceramic substrate. 437
electrical characteristics 2N2907AHR 4/16 doc id 15382 rev 3 2 electrical characteristics (a) jans and escc version of the products are assembled and tested in compliance with the agency specification it is qualified in. the electrical characteristics of each version are provided in dedicated tables. t case = 25 c unless otherwise specified. 2.1 jans electrical characteristics a. for pnp type, voltage and current values are negative. table 4. jans electrical characteristics symbol parameter test conditions min. typ. max. unit i cbo collector cut-off current (i e = 0) v cb = 60 v v cb = 50 v v cb = 50 v t amb = 150 c - 10 10 10 a na a i ces collector cut-off current (i e = 0) v ce = 50 v - 50 na i ebo emitter cut-off current (i c = 0) v eb = 5 v v eb = 4 v - 10 50 a na v (br)ceo (1) collector-emitter breakdown voltage (i b = 0) i c = 10 ma 60 - v v ce(sat) (1) collector-emitter saturation voltage i c = 150 ma i b = 15 ma i c = 500 ma i b = 50 ma - 0.4 1.6 v v v be(sat) (1) base-emitter saturation voltage i c = 150 ma i b = 15 ma i c =500ma i b =50ma 0.6 1.3 2.6 v h fe (1) dc current gain i c = 0.1 ma v ce = 10 v i c = 1 ma v ce = 10 v i c = 10 ma v ce = 10 v i c = 150 ma v ce = 10 v i c = 500 ma v ce = 10 v i c = 10 ma v ce = 10 v t amb = -55 c 75 100 100 100 50 50 - 450 300 h fe small signal current gain v ce = 20 v i c = 20 ma f = 100 mhz v ce = 10 v i c =1 ma f = 1 khz 2 100 - c obo output capacitance (i e = 0) v cb = 10 v 100 khz f 1 mhz -8pf
2N2907AHR electrical characteristics doc id 15382 rev 3 5/16 2.2 escc electrical characteristics c ibo output capacitance (i e = 0) v eb = 2 v 100 khz f 1 mhz -30pf t on tu r n - o n t i m e v cc = 30 v i c = 150 ma i b1 = 15 ma -45ns t off turn-off time v cc = 30 v i c = 150 ma i b1 = -i b2 = 15 ma - 300 ns 1. pulsed duration = 300 s, duty cycle 2 % table 4. jans electrical characteristics (continued) symbol parameter test conditions min. typ. max. unit table 5. escc electrical characteristics symbol parameter test conditions min. typ. max. unit i cbo collector cut-off current (i e = 0) v cb = 50 v v cb = 50 v t amb = 150 c - 10 10 na a v (br)cbo collector-base breakdown voltage (i e = 0) i c = 10 a 60 - v v (br)ceo (1) 1. pulsed duration = 300 s, duty cycle 2 % collector-emitter breakdown voltage (i b = 0) i c = 10 ma 60 - v v (br)ebo emitter-base breakdown voltage (i c = 0) i e = 10 a 5 - v v ce(sat) (1) collector-emitter saturation voltage i c = 150 ma i b = 15 ma - 0.4 v v be(sat) (1) base-emitter saturation voltage i c = 150 ma i b = 15 ma 0.87 1.3 v h fe (1) dc current gain i c = 0.1 ma v ce = 10 v i c = 10 ma v ce = 10 v i c = 150 ma v ce = 10 v i c = 500 ma v ce = 10 v 75 100 100 50 - 300 h fe small signal current gain v ce = 20 v i c = 20 ma f = 100 mhz 2- c obo output capacitance (i e = 0) v cb = 10 v 100 khz f 1 mhz -8pf t on tu r n - o n t i m e v cc = 30 v i c = 150 ma i b1 = 15 ma -45ns t off turn-off time v cc = 30 v i c = 150 ma i b1 = -i b2 = 15 ma - 300 ns
electrical characteristics 2N2907AHR 6/16 doc id 15382 rev 3 2.3 electrical characteristics (curves) figure 2. dc current gain (v ce =1 v) figure 3. dc current gain (v ce =10 v) figure 4. collector emitter saturation voltage figure 5. base emitter saturation voltage (h fe =10) !-v !-v !-v !-v
2N2907AHR electrical characteristics doc id 15382 rev 3 7/16 2.4 test circuits figure 6. jans saturated turn-on switching time test circuit figure 7. jans saturated turn-off switching time test circuit notes: 1. the rise time (t r ) of the applied pulse shall be 2.0 ns, duty cycle 2 percent and the generator source impedance shall be 50 ohms. 2. sampling oscilloscope: z in 100 k ohms, c in 12 pf, rise time 5 ns. notes: 1. the rise time (t r ) of the applied pulse shall be 2.0 ns, duty cycle 2 percent and the generator source impedance shall be 50 ohms. 2. sampling oscilloscope: z in 100 k ohms, c in 12 pf, rise time 5 ns.
electrical characteristics 2N2907AHR 8/16 doc id 15382 rev 3 figure 8. escc resistive load switching test circuit 1. fast electronic switch 2. non-inductive resistor
2N2907AHR package mechanical data doc id 15382 rev 3 9/16 3 package mechanical data in order to meet environmental requirements, st offers these devices in different grades of ecopack ? packages, depending on their level of environmental compliance. ecopack ? specifications, grade definitions and product status are available at: www.st.com . ecopack ? is an st trademark. table 6. product mass summary package mass (g) lcc-3ub 0.06 lcc-3 0.06 to-18 0.40
package mechanical data 2N2907AHR 10/16 doc id 15382 rev 3 figure 9. lcc-3ub drawings table 7. lcc-3ub mechanical data dim. mm. min. typ. max. a 1.16 1.42 c 0.46 0.51 0.56 d 0.56 0.76 0.96 e 0.92 1.02 1.12 f 1.95 2.03 2.11 g 2.92 3.05 3.18 i 2.41 2.54 2.67 j 0.42 0.57 0.72 k 1.37 1.52 1.67 l 0.41 0.51 0.61 m 2.46 2.54 2.62 n 1.81 1.91 2.01 r 0.20 r1 0.30 r2 0.56
2N2907AHR package mechanical data doc id 15382 rev 3 11/16 figure 10. lcc-3 drawings table 8. lcc-3 mechanical data dim. mm. min. typ. max. a 1.16 1.42 c 0.45 0.50 0.56 d 0.60 0.76 0.91 e 0.91 1.01 1.12 f 1.95 2.03 2.11 g 2.92 3.05 3.17 i 2.41 2.54 2.66 j 0.42 0.57 0.72 k 1.37 1.52 1.67 l 0.40 0.50 0.60 m 2.46 2.54 2.62 n 1.80 1.90 2.00 r 0.30 2 1 3
package mechanical data 2N2907AHR 12/16 doc id 15382 rev 3 figure 11. to-18 drawings table 9. to-18 mechanical data dim. mm. min. typ. max. a 12.7 b 0.49 d 5.3 e 4.9 f 5.8 g 2.54 h 1.2 i 1.16 l 45
order codes 2N2907AHR 13/16 doc id 15382 rev 3 4 order codes contact st sales office for information about the specific conditions for: ? products in die form ? other jans quality levels ? tape and reel packing table 10. order codes part number agency specification eppl quality level radiation level package lead finish marking (1) packing j2n2907aub1 - - engineering model jans - lcc-3ub gold j2n2907a waffle pack 2n2907aub1 - engineering model escc lcc-3ub gold u03 waffle pack soc2907a - engineering model escc lcc-3 gold p03 waffle pack jans2n2907aubg mil-prf-19500/291 - jans flight lcc-3ub gold js2907 waffle pack jans2n2907aubt mil-prf-19500/291 - lcc-3ub solder dip js2907 waffle pack 2n2907aub06 5202/001/06 yes escc flight lcc-3ub gold 520200106 waffle pack 2n2907aub07 5202/001/07 yes lcc-3ub solder dip 520200107 waffle pack soc2907ahrb 5202/001/04 or 05 (2) yes lcc-3 gold or solder dip (2) 520200104 or 05 (2) waffle pack 2N2907AHR 5202/001/01 or 02 (2) -to-18 gold or solder dip (2) 520200101 or 02 (2) strip pack 1. specific marking only. the full marking includes in addition: for the engineering models : st logo, date code, country of origin (fr). for escc flight parts : st logo, date code, country of origin (f r), esa logo, serial number of the part within the assembly lot . for jans flight parts : st logo, date code, country of origin (fr), manufacturer code (cstm), serial number of the part within the assembly lot. 2. depending escc part number ment ioned on the purchase order.
shipping details 2N2907AHR 14/16 doc id 15382 rev 3 5 shipping details 5.1 data code data code is structured as described below: ? em (escc and jans) xyywwz ? escc flight yywwz ? jans flight xyywwz where: 5.2 documentation xyywwz 3: em w: flight part/ diffused in singapore last two digits year week digits lot index in the week table 11. documentation provided for each type of product quality level radiation level documentation engineering model - - jans flight - certificate of conformance escc flight - certificate of conformance
2N2907AHR revision history doc id 15382 rev 3 15/16 6 revision history table 12. document revision history date revision changes 09-feb-2009 1 initial release 30-nov-2011 2 ? modified table 1 on page 1 ? minor text changes in the document title and description on the coverpage 14-may-2012 3 new package inserted (lcc-3ub). updated: ? table 1: device summary , table 2: absolute maximum ratings and table 3: thermal data . ? section 2: electrical characteristics and section 3: package mechanical data . added: ? section 4: order codes and section 5: shipping details .
2N2907AHR 16/16 doc id 15382 rev 3 please read carefully: information in this document is provided solely in connection with st products. stmicroelectronics nv and its subsidiaries (?st ?) reserve the right to make changes, corrections, modifications or improvements, to this document, and the products and services described he rein at any time, without notice. all st products are sold pursuant to st?s terms and conditions of sale. purchasers are solely responsible for the choice, selection and use of the st products and services described herein, and st as sumes no liability whatsoever relating to the choice, selection or use of the st products and services described herein. no license, express or implied, by estoppel or otherwise, to any intellectual property rights is granted under this document. i f any part of this document refers to any third party products or services it shall not be deemed a license grant by st for the use of such third party products or services, or any intellectual property contained therein or considered as a warranty covering the use in any manner whatsoev er of such third party products or services or any intellectual property contained therein. unless otherwise set forth in st?s terms and conditions of sale st disclaims any express or implied warranty with respect to the use and/or sale of st products including without limitation implied warranties of merchantability, fitness for a particular purpose (and their equivalents under the laws of any jurisdiction), or infringement of any patent, copyright or other intellectual property right. unless expressly approved in writing by two authorized st representatives, st products are not recommended, authorized or warranted for use in military, air craft, space, life saving, or life sustaining applications, nor in products or systems where failure or malfunction may result in personal injury, death, or severe property or environmental damage. st products which are not specified as "automotive grade" may only be used in automotive applications at user?s own risk. resale of st products with provisions different from the statements and/or technical features set forth in this document shall immediately void any warranty granted by st for the st product or service described herein and shall not create or extend in any manner whatsoev er, any liability of st. st and the st logo are trademarks or register ed trademarks of st in various countries. information in this document supersedes and replaces all information previously supplied. the st logo is a registered trademark of stmicroelectronics. all other names are the property of their respective owners. ? 2012 stmicroelectronics - all rights reserved stmicroelectronics group of companies australia - belgium - brazil - canada - china - czech republic - finland - france - germany - hong kong - india - israel - ital y - japan - malaysia - malta - morocco - philippines - singapore - spain - sweden - switzerland - united kingdom - united states of america www.st.com


▲Up To Search▲   

 
Price & Availability of 2N2907AHR

All Rights Reserved © IC-ON-LINE 2003 - 2022  

[Add Bookmark] [Contact Us] [Link exchange] [Privacy policy]
Mirror Sites :  [www.datasheet.hk]   [www.maxim4u.com]  [www.ic-on-line.cn] [www.ic-on-line.com] [www.ic-on-line.net] [www.alldatasheet.com.cn] [www.gdcy.com]  [www.gdcy.net]


 . . . . .
  We use cookies to deliver the best possible web experience and assist with our advertising efforts. By continuing to use this site, you consent to the use of cookies. For more information on cookies, please take a look at our Privacy Policy. X